EchoMax Active XS Band Radar Reflector Kit - EMACTIVEXSM

Features:

• EchoMax Active-XS (Model EMACTIVEXSM) picks up both X band and offshore S band radar for more complete protection
• Active-X and XS Radar Target Enhancer amplifies and returns an amplified response when excited by incoming radar signals
  • This greatly increases your vessel's RCS, radar cross section, and the likelihood of alerting oncoming vessels of your position, especially in poor conditions
  • Active-X reduces the risk of surprise or collision
  • The RTE is primarily intended for small vessels with no radar fitted and typically should enhance the RCS (radar cross section) of vessels up to 25M in length
  • For Small craft and rigid inflatables, improvements will start to be seen at around 1-2 miles extending to 8-10 miles or more depending on prevailing conditions
  • The response of the RTE will vary according to range, RTE and radar height above sea level, radar power and condition
  • Poor weather, sea state and precipitation will greatly reduce the response
• The streamlined reflector is only 27 inches high and 1.6 inches in diameter allowing for flexible installation on all sorts and sizes of vessels

Package Includes:

• Onboard alarm / Control box that indicates to the operator their vessel is a radar target
• An alarm condition triggers both internal and external visual and audible alarms
• Includes a standard surface mounted Control box (Flush mount kit EMFMKM is Sold Separately)
• Active-X Antenna with Base Mount
• 80 Feet of cable

Specifications:

• Operation:
  • Reception frequency: X Band Radar 9.3 - 9.5 GHz , S Band Radar 2.9 - 3.1 GHz
  • Operating Temperature: - 20 to + 60 degrees C
  • Voltage: 12V DC - + 30% -10% (voltage surge and cross polarity protected)
  • Current consumption in standby state: <23 mA
  • Current consumption when transmitting: X Band Radar 190 mA, S Band Radar 155 mA
  • Position accuracy: Within 3 feet
• EIRP: 1W (Typically)
• Dimensions:
  • Antenna length: 27"
  • Antenna width: 1.6"
  • Mounts to standard 1 x 14 Antenna mount
  • Antenna weight without cable: 1.25 lbs
  • Control Box width: 3.6"
  • Control Box height: 2"
  • Control Box depth: 1.5"
  • Cable length: 80 feet
  • Cable weight: 2 lbs
• Control Box:
  • Surface mount for interior installation
    • Optional flush mount, or waterproof version for exterior fitting (Sold Separately)
  • Wire exit from bottom or rear
  • Active Antenna can be special ordered without the control box for autonomous vehicles requiring just radar transponder operation
  • Operation:
    • Green Switch activates internal buzzer when painted by X or S Band Radar
    • Green LED illuminates when being painted by X Band Radar
    • Yellow LED illuminates when being painted by S Band Radar
    • 8A Extension alarm facility when painted by either S or X Band Radar
    • Externally accessible fuse
• Antenna Mounting Bracket:
  • ACTIVE-X Stainless vertical surface bracket
    • Base fitting for cabin roofs, A frames
  • Mounting Options: (Sold Separately)
    • Offset Mast head bracket with 10.2 in. reach and 1 inch -14NF thread
    • 26" Extension pole
• Complies with:
  • EN 302 752 V1.1.1. (2009-02)
  • EN 60945: 2002 (Clauses 9,10 & 12)
  • Complies with essential requirements of
  • R & TTE Directive 1999/5/EC. CE 0191:
    • Performance requirements of ISO 8729-2
    • X and S Band Radar
• X Band Radar SPL
  • (ISO Standard 7.5 m2)
  • Zero degrees: 118.33 m2
  • +/-10 degrees: 65.07 m2
  • +/- 20 degrees: 19.49 m2
• S Band Radar SPL
  • (ISO Standard 0.5 m2)
  • Zero degrees: 6.26 m2
  • +/- 10 degrees: 6.44m2
  • +/-20 degrees: 5.36 m2