Item #923391

Dometic DTM04 TankWatch 4-Level Tank Monitor System

31 Review
$358.99
          Want an email once available?
          Buy with

          Image of : Dometic DTM04 TankWatch 4-Level Tank Monitor System Dometic DTM04 TankWatch 4-Level Tank Monitor System Item # 923391

          Description

          Dometic DTM04 TankWatch 4-Level Tank Monitor System.

          Features:

          • Includes (1) 4-level probe cap assembly with vent connection, 45" stems
          • Panel displays easy-to-read LED illumination indicating (4) levels of waste holding tank contents – Empty, Low, Mid and Full
          • One light is always "on" to indicate system power, eliminate confusion and save battery power
          • Flexible probe design eliminates false readings from fouled float switches
          • Available probe lengths fit tank depths to 22" or 45"
          • Installs in any rigid tank with optional 3" NPT mounting flange
          • Probe cap provides clean-out fitting for easy access to tank interior
          • Vent hose connection in probe cap (included) permits connection of 5/8" vent hose
          • Optional relay (not included) shuts down toilet when waste tank is full
          • CE approved for electromagnetic compatibility

          Specifications:

          • Dometic Model No. 313604003
          • Probe Stem Length: 45"
          • Vent Hose Connection: Yes
          • Nominal Voltage: 12 / 24V DC
          • Current Draw: 8 mA @ 12V DC
          • Dimensions (monitor panel): 3 1/4" x 3 1/4"

          Installation and Operation Manual

          Part Numbers for Dometic DTM04 TankWatch 4-Level Tank Monitor System

          Related Categories

          Related Categories

          Reviews

          Rated 3 out of 5 by from Replacement Install Purchased to replace Tank Watch III unit. The unit display is not the same size as the old one, so assume you will need to fashion a new mounting plate. Also, the part did not come with the 4-conductor cable (tank probes to the display), nor was it readily available. Making this up took hours. Otherwise straightforward install.
          Date published: 2025-01-12
          • y_2025, m_5, d_13, h_13
          • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
          • cp_1, bvpage1
          • co_hasreviews, tv_0, tr_1
          • loc_en_US, sid_conf.502271, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
          • clientName_defendermarine
          • bvseo_sdk, p_sdk, 3.2.1
          • CLOUD, getReviews, 4.62ms
          • REVIEWS, PRODUCT

          Questions

          I have 3 tanks I want to monitor, 2 fresh water and the wastewater tank. The Dometic website says the DTM04 is for monitoring the waste tank and the DTM08 is for waste and fresh water and DTM12 is for waste, fresh water and gray water.  Please clarify

          Asked by: Pedro
          The DTM12 would monitor all three tanks off of a single monitor. The DTM04 only monitors the one tank (waste), the DTM08 can monitor 2 tanks simultaneously (waste and fresh water). Please feel free to reach out to us at [email protected] if you have further questions or need specific guidance.
          Answered by: MorningGlory
          Date published: 2024-11-05
          • y_2025, m_5, d_12, h_9CST
          • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
          • cp_1, bvpage1
          • co_hasquestionsanswers, tq_1
          • loc_en_US, sid_conf.502271, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
          • clientName_defendermarine
          • bvseo_sdk, p_sdk, 3.2.1
          • CLOUD, getContent, 3.43ms
          • QUESTIONS, PRODUCT