Shopping from Canada? 
Go to Defender Canada!
C-Level 3-Strap XL-Series Dinghy Lift - 8895
$141.99
C-Level 3-Strap XL-Series Dinghy Lift - 8895 Item # 864086
Description
Features:
- The C-Level XL-3 Dinghy-Lift™ truly can do double duty
- Dinghy lift can be used for lifting an inflatable by either a one-point system (i.e. Halyard or crane) or by a two-point system (i.e. Double davits)
- (3) internal lifting eyes for attachment, particularly for RIBs
- Each of the legs has adjustable, stainless buckles to help you balance the load
- Strong (3800 lbs test) nylon webbing is 1" in diameter
- Nylon webbing legs replaces old fashioned wire legs but will not corrode or chafe your hull
- All hardware is Stainless Steel, including snap hooks
- Safe working load: 450 lbs
- Application: Dinghys up to 14' L and 450 lbs
Important Note: Not for Use with Motor Attached.
Part Numbers for C-Level 3-Strap XL-Series Dinghy Lift - 8895
Reviews
Questions
This is rated for 450lbs. My Zodiac RIB is 110lbs plus a 113lbs 9.9HP motor. Can I safely lift my dinghy even though the description states: "Important Note: Not for Use with Motor Attached."
Thanks Matt. Your advice makes sense. In the case of the Zodiac RIB 300, the transom and hull are all welded aluminum and the sling attaches to aluminum tabs welded at the joint between the hull and transom as well as welded in the V of the bow section of the aluminum hull, so there is no effort transferred to the tubes from the additional weight of the motor.
Xavier
Date published: 2024-09-13