Blue Sea Systems Weather Deck Waterproof Non-Fused Switch Panel

The Blue Sea Systems WeatherDeck Waterproof Toggle Switch Panel is designed to be mounted in small or inflatable boats, which already have circuit protection, and do not run at night. This switch panel has all the rugged features of the proven WeatherDeck® Panel family however it does not have the added cost of backlighting and circuit protection.

Features:

• 2 Toggle switches with boots
• Compatible with 12 and 24V DC electrical systems
• Designed for wet locations where backlighting is not needed and circuit protection already exists
• Panel front rated IP67 (protected against immersion up to one meter for 30 minutes) when properly mounted with watertight mounting gasket
• Integrated switch guards reduce the risk of accidental switching
• Each panel can be mounted in four different orientations
• UV stabilized, weather-resistant faceplate snaps on and off providing access to components and concealed mounting screws

Specifications:

• Function: On/Off
• Rating: 15A each
• Nominal Voltage: 12V DC, 24V DC
• Maximum Amperage: 15A @ 12V DC per circuit
• Backlight: None
• Circuit Protection: None
• Material: Reinforced polycarbonate
• Panel Color: Gray
• Waterproof IP67: Protected against immersion up to 1 meter for 30 minutes

Includes:

• (2) 4150 WeatherDeck® toggle switch/SPST - ON-OFF
• (2) 4138 WeatherDeck® toggle switch boot - Black
• (1) 4215 Waterproof DC Label Kit - (30) black square labels

Note: The pairing of the WeatherDeck® Switch Only panel and the ST Blade Fuse Block with Ground (Sold Separately) is ideal for small runabouts and RIBS. These boats often require the waterproof switching but do not require backlighting and are primarily operated during daylight hours. Using an ST Blade Fuse Block allows consolidation of all of the boat's circuit protection in a dry and protected location.

Installation Instructions