Blue Sea Systems M2 Vessel Systems Monitor - 1850

The Blue Sea Systems M2 Vessel Systems Monitor performs comprehensive monitoring of (4) critical systems in one compact organic LED digital monitor.

Features:

• One input monitors the DC voltage, state-of-charge, current for one battery bank and another input monitors the voltage of an additional battery bank
  • Alarms include high and low voltage, high current, and low battery
• Monitors a single AC voltage, current, and frequency
  • Alarms include high and low voltage, high current, and high and low frequency
• Bilge monitoring - two inputs can be configured as a bilge or tank monitor
• When configured as a bilge input, monitoring functions include pump active, cycle count in the last 24-hours, average cycles in a typical 24-hour period, and total cycles
  • High alarms can be set for both the minutes of run time in the last hour as well as the number or cycle counts in the last 24 hours
• When configured as a tank input, tank status can be represented in both capacity (gallons or liters) or as a percentage of capacity
• Custom tank shapes can be auto-calibrated or programmed
  • Both high and low level alarms can be set for all tanks
• NMEA 2000 certified and uses standard connectors
• Allows a single network backbone to be installed for multiple NMEA 2000 devices
• M2 VSM can share certain monitoring functions with other NMEA 2000 compliant screens, such as CZone Displays Touch 5 & Touch 10

Specifications:

• Meter Monitors: Bilge, Current, Tank, Voltage
• Nominal Voltage:
  • 120V AC @ 60Hz, North America
  • 230V AC @ 60Hz, Typical of Europe
  • 12V DC
  • 24V DC
  • 48V DC
• Operating Voltage:
  • 40-300V AC
  • 7-70V DC
• Current Accuracy:
  • +/- 2% AC
  • +/- 1% DC
• Current Range:
  • 0-150A AC
  • -500 to 500A DC
• Frequency: 40-90Hz
• Minimum Current Draw:
  • 18.8mA @ 12V, backlight off
  • 35mA @ 12V, backlight off
• Voltage Accuracy: +/- 1%
• Waterproof rating: IP67

Owner's Manual (1.73 MB)

Quick Start Installation Instructions