Item #934100

Awlgrip Polyester Urethane Topcoat Base - Extreme Black - G2066Q

00 Review
$101.99
Want an email once available?
Buy with

Image of : Awlgrip Polyester Urethane Topcoat Base - Extreme Black - G2066Q Awlgrip Polyester Urethane Topcoat Base - Extreme Black - G2066Q Item # 934100

Description

Awlgrip's Extreme Black, high gloss Polyester Urethane Topcoat Base (G2066) is a two component, polyester based, light-fast, linear aliphatic polyurethane coating. It provides a durable high gloss finish to wood, fiberglass, aluminum or steel and can be applied with a roller, brush or spray gun. With its superior resistance to sun, saltwater, chemicals and abrasion, this topcoat is ideal for coating everything from topsides, cabin tops, decks and masts to engines.

Features:

  • Two component, polyester based, light-fast, linear aliphatic polyurethane coating
  • Extreme Black color with high gloss finish (formerly Jet Black)
  • May be applied with a sprayer, roller or brush with proper converter
  • Superior resistance to sun, saltwater, chemicals and abrasion
  • Appropriate for use on fiberglass, steel and wood
  • Low maintenance

Specifications:

  • Spray application:
    • 530 sq. ft. at one mil dry film thickness
    • 210 sq. ft. at recommended dry film thickness with 2 - 3 coats
    • Recommended wet film thickness: 6-9 mils (150-225 microns), total of 2-3 coats
    • Recommended dry film thickness: 2-3 mils (50-75 microns), total of 2-3 coats
  • Brush / roller application:
    • 700-725 sq. ft. at one mil dry film thickness
    • 285 sq. ft. at recommended dry film thickness with 2 - 3 coats
    • Recommended wet film thickness: 4.5-6 mils (112-150 microns), 2 coats
    • Recommended dry film thickness: 2-3 mils (50-75 microns), 2 coats
  • Anticipated cure time at 77° F and 50% relative humidity:
    • 24 hours to tape free
    • 3 days to light service
    • 14 days for full cure
  • Recoating:
    • Spray applications consist of 2-3 coats over 1-4 hours
    • Brush/roller applications require 16 hours between each coat with sanding between coats
    • Time will vary with temperature, size, and film thickness applied
  • VOC:
    • Base: 470 g/lt (3.9 lbs/gal)
    • Spray converter: 591 g/lt (4.9 lbs/gal)
    • Brush converter: 276 g/lt (2.3 lbs/gal)

Notes:

  • Not to be used below the waterline
  • This multi-component system is intended for experienced painters. Please read mixing and application instructions thoroughly prior to starting project to ensure best results
  • Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and environment
WARNING

This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.

For more information go to www.p65warnings.ca.gov.

Part Numbers for Awlgrip Polyester Urethane Topcoat Base - Extreme Black - G2066Q

Related Categories

Related Categories

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 36.61ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Questions

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 30.28ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;