Airmar B75 Chirp-Ready Transducer - 12-Pin MMC

Airmar's low profile, Chirp-ready B75 transducer delivers a narrow beamwidth, that is excellent for pinpointing fish holding tight to wrecks, reefs and other structures. In just one installation, the B75 provides amazing bottom detail and target separation on baitfish and schooling gamefish.

Features:

• Depth and fast-response water-temperature sensor
• Great shallow-water performance
• Low-profile, thru hull housing provides good resolution at speed when properly installed almost flush to the hull
• Bronze housing for use on stepped, planing or displacement hull
• Corrects for the hull deadrise by orientating the beam directly down
• Exclusive Xducer ID® technology
• Automatic configuration of echosounder to transducer - enables the echosounder to adapt to the transducer connected, providing an optimized system
• Continuous monitoring of ceramic operating temperatures
• Transducer profile information can be presented on the OEM echosounder display

Specifications:

• Acoustic window: Urethane
• Cable end connection: Airmar 12-Pin (MMC)
• Low frequency: 40 to 75 kHz
  • 32° to 21° beamwidth
  • Maximum depth: 1,200' (353 m)
• Medium frequency: 80 to 130 kHz
  • 24° to 16° beamwidth
  • Maximum depth: 900' (274 m)
• High frequency: 130 to 210 kHz
  • 15° to 9° beamwidth
  • Maximum depth: 700' (214 m)
• Recommended boat length: Up to 25' (8 m)
• Hull material: Fiberglass or wood
• Transducer element: One internal broadband ceramic assembly
• Hole diameter: 2 13/16" (70 mm)
• Transducer tilt options:
  • 0° tilt angle that compensates for 0° to 7° hull deadrise
  • 12° tilt angle that compensates for 8° to 15° hull deadrise
  • 20° tilt angle that compensates for 16° to 24° hull deadrise
• Weight: 3 lbs (1.4 kg)

Installation Instructions