Raymarine Evolution EV-100 Wheel Autopilot Pack with P70s Control Head - T70152

Raymarine Evolution EV-100 Wheel Autopilot Pack with P70s Control Head - T70152
Description
Add the safety and efficiency of an autopilot system with the easy-to-install Raymarine Evolution EV-100 Wheel Autopilot package that includes a P70s Control Head. Designed specifically for sailboats, this package features the P70s Control Head with push-button operation, advanced LED backlighting and a wide, 160-degree viewing angle so you can easily check the display from various positions.
The EV-1 Sensor Core combines advanced solid-state sensors with the Evolution autopilot processor in a single, easy-to-install housing. This system tracks pitch, roll, yaw and heading from a 9-axis monitoring system. Integrated aerospace guidance technology creates Evolution Ai control algorithms so your autopilot responds instantly as sea conditions and vessel dynamics change, and the start-up wizard helps you configure the pilot quickly and easily with no compass calibration required.
General Features:
- Fully enclosed wheel drive fits most wheels and delivers outstanding autopilot performance
- Simple, straightforward installation
- Suitable for smaller to mid-size sailboats with max. displacement of 16,500 lbs
EV-1 Sensor Core Features:
- Combines advanced solid-state sensors with the Evolution autopilot processor in a single easy-to-install housing
- Mounted above or below decks, rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing / submersion standards
- 9-Axis sensor monitors vessel motion in 3 dimensions
- Precision monitoring of heading, pitch, roll, and yaw allows the autopilot to evolve instantly as sea conditions and vessel dynamics change
- Simple SeaTalk ng connectivity to control head and ACU
- Solid state sensor technology delivers dynamic accuracy to within 2° in all conditions
- Auto-compensation for onboard magnetic fields and reliable heading accuracy in northern and southern extremes
- Fast and reliable heading data for MARPA, radar overlay and heading modes on Raymarine multifunction displays
P70s Control Head Features:
- The Raymarine P70s Autopilot Controller is a push-button operation controller designed primarily for sailboats
- Superior Viewing Advanced LED backlighting offers low power consumption and delivers vibrant color and contrast
- Wide horizontal and vertical viewing angles ensure the display can be seen clearly from acute positions
- LightHouse user interface is simple and quick to use
- Display: 3.5" LED
- Wide 160° viewing angle
- Start up wizard helps you configure the pilot quickly and easily
- Anti-reflective coating for improved visibility in bright sunlight
- Low power - typically 132mA/1.6W (27% less than ST70 at x4 measured brightness)
- Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer
- Simple system and group dimming/illumination
- Support for multiple data sources
- SeaTalk ng NMEA 2000 and SeaTalk 1 connectivity (no bridging required)
ACU-100 Actuator Control Unit Features:
- Delivers reliable autopilot drive power and provides power to the SeaTalk ng bus
- Specifically designed to complement Raymarine's unique wheel-drive and tiller-drive applications
- Provides powerful and secure interface between steering systems and the EV-1 course computer and 9-axis sensor
- Completely sealed may be mounted above decks on boats where space is limited
EV-100 Wheel Drive Features:
- Fully enclosed wheel-drive for simple installation and superb autopilot performance
- Fits most wheel types
- Simple, robust clutch engagement mechanism
EV-1 Sensor Core (E70096) Specifications:
- Nominal Supply Voltage: 12V DC
- Operating Voltage Range: 10.8 - 15.6V DC
- Power Consumption: 30 mA
- Sensors:
- 3-Axis digital accelerometer
- 3-Axis digital compass
- 3-Axis gyro digital angular rate sensor
- Data Connections: SeaTalk ng
- Waterproof Rating: IPX6
- Dimensions: 5.5" W x 5" H x 5" D
P70s Control Head (E70328) Specifications:
- Nominal Supply Voltage: 12V DC
- Operating Voltage Range: 9 - 16V DC
- Power Consumption: 1.6W
- Data Connections: SeaTalk ng and SeaTalk 1 compliant with NMEA2000 marine networks
- Display: 3.5" / 320 x 240 QVGA / Sunlight redable optically bonded LCD
- Waterproof Rating: IPX6
- Flush Mount Cutout: 3.54" dia
ACU-100 Actuator Control Unit (E70098) Specifications:
- Drive Current Output: Max. continuous 7 Amp
- Drive Clutch Output: No clutch connection
- Nominal Supply Voltage: 12V DC
- Operating Voltage Range: 10.8 - 15.6V DC
- Power Consumption (standby) - Main Power Supply: 300 mA @ 12V DC
- Power Consumption (standby) - SeaTalk ng : No power supply to SeaTalk ng
- Data Connections: SeaTalk ng
- Connections: Rudder reference sensor, drive motor, ground
- Waterproof Rating(s): IPX6 (drive electronics) / IPX2 (connector panel)
- Dimensions: 7.1" W x 5.5" H x 2.0" D
Wheel Drive (E12093) Specifications:
- Max. Recommended Vessel Displacement: 16,500 lbs
- Revs per Minute (rpm): 9
- Thrust: 30 Nm
- Connections: SeaTalk ng (1), NMEA 2000 with adapter cable
In the Box:
- EV-1 Sensor Core (E70096)
- P70s Control Head (E70328)
- ACU-100 Actuator Control Unit (E70098)
- ST 4000 mk2 Wheel Drive (E12093)
- Evolution Cable Kit (R70160)
- 1 x SeaTalk ng Power cable
- 1 x SeaTalk ng Backbone cable
- 1 x SeaTalk ng Spur cable
- 1 x SeaTalk ng 5-way connector block
- 2 x SeaTalk ng T-piece connector
- 2 x SeaTalk ng Terminator