Octopus Autopilots 9" Stroke Remote Hydraulic Linear Actuator - OCTAF2012LAR9

The Octopus Hydraulic Linear Actuator is a simple, effective way to drive the rudder on a boat equipped with a mechanical steering system.

Features:

• Designed for sailboats with mechanical steering
• Recommended for vessels up to 70 feet or 37,500 lbs
• Compatible with most of the major Autopilot Electronic brands
• When the autopilot is not in use, the cylinder runs freely along with the rudder
• When the automatic pilot is in use, a solenoid valve on the actuator closes and locks the cylinder
• Steering signals from the pilot are now fed to the DC motor, which drives the pump to move the cylinder back and forth
• De-energized, the solenoid valve immediately disconnects the automatic pilot from the rudder
• The actuator has a small translucent oil reservoir, making it easy to check fluid levels - only has five moving parts throughout unit
• Mechanical simplicity gives Precision Products reliability and ease of service when compared to complicated gear and screw actuators, making Precision Products units a favorite for offshore mariners
• Shipped from factory completely filled with oil and require no additional plumbing

Specifications:

• Power: 12V DC
• Cylinder Bore: 45 mm
• Variable Flow Rate: 1-2 Liters / Minute
• Stroke: 228.6 mm / 9"
• Hardover Time: 14-16 Seconds
• Peak Thrust: 600kg / 1322 lbs
• Max Boat Length: 22 m / 70 Feet
• Maximum Laden Displacement: 17,000 kg / 37,500 lbs