KoolAir PM500 Submersible Magdrive Pump
$292.99
KoolAir PM500 Submersible Magdrive Pump Item # 872322
Description
Features:
- The KoolAir PM 500 is magnetically driven pump, with no shaft seal
- The pump is epoxy encapsulated, which allows the PM pump to run fully submerged in many liquids or in open air for complete moisture protection
- When re-assembling the pump for service, make sure all "O" Rings are properly seated
- The pump is not self - priming and requires a suction
- The pump features run-dry and thermal overload protection
- This pump impeller features a hardened Carbon Interior bushing which allows for extended run-dry time without damaging the pump head
- In a run dry situation the pump thermal overload protection will shut the pump down if it exceeds a safe temperature
- Simply let it cool down or hose it down to assist in the cooling
Specifications:
- Single Phase
- All cords are 6 feet in length and are U.L. LISTED 18/3 wire
- The motors are rated as continuous duty
- Max Flow: 8.5 GPM
- Max Head: 19 feet (8.2 PSI)
- Inlet: 3/4" FPT
- Outlet: 1/2" MPT
- Dimensions: 4.87" (12.3 cm) H x 4.80 (12.2 cm) W x 7.50" (19.0 cm) L
- Includes Marine Base Adapter
- Mounting Holes for Base: 4.37" x 3.14" on Center
- 2 Year Warranty: Koolair Pumps are guaranteed only against defects in workmanship or materials for a period of two years from date of manufacture while pumping water