Item #870759

Isotherm 2010-SX Compact Air Cooled Refrigeration Component System with ISEC - U125X041L17151AA

00 Review
$946.00

Only compatible with Model XA extension tube sets; item #872073. Model XA tube set couplings have red and yellow plastic caps.

Want an email once available?
Buy with

Image of : Isotherm 2010-SX Compact Air Cooled Refrigeration Component System with ISEC - U125X041L17151AA Isotherm 2010-SX Compact Air Cooled Refrigeration Component System with ISEC - U125X041L17151AA Item # 870759

Description

The Isotherm 2010-SX Compact Air Cooled Refrigeration Component System with Isotherm Smart Energy Control (ISEC) offers the very unique opportunity to dramatically reduce on board power consumption for refrigeration appliances. It can cool as a refrigerator or as a freezer. The maximum freezer capacity is 1.5 cubic feet and the maximum refrigerator capacity is 4.4 cubic feet. It's a fan-cooled compressor unit designed for simple installation in existing top or side-loaded refrigerator boxes. All Isotherm Compact Systems come complete and pre-charged. Each system is rated to refrigerate or freeze a specific volume so there's no guessing what will work best for your boat.

Features:

  • Isotherm 2010-SX Compact Air Cooled Refrigeration Component System with Isotherm Smart Energy Control (ISEC) offers the very unique opportunity to dramatically reduce on board power consumption for refrigeration appliances
  • The sophisticated, processor-based Isotherm Smart Energy Control technology achieves significant power consumption savings by continuously scanning a set of key environmental factors to determine, through advanced proprietary algorithms, what is the most relevant compressor speed to maximize the performance/battery drain ratio (COP)
  • The device not only makes your fridge intelligent but also allows the storage of a significant amount of cold energy into the loaded food and drinks
  • Isotherm Smart Energy Control reduces the cabinet temperature more than a traditional fridge without freezing the food
  • This is continuously monitored by an air sensor in the cabinet
  • The cooling energy is stored when a power surplus is available (engine on or connection to shore power) and reused first, before the fridge is running on battery
  • The result: Up to 35 % savings due to a more efficient use of the compressor and up to 50 % savings with combined effects of stored cooling energy in food and drinks
  • Refrigerator or freezer use
  • Fan-air cooled compressor, electronics and refrigerant
  • 12 / 24V DC Danfoss/Secop compressor
  • Easy to install with pre-charged system, "Click-on" bracket and quick connect lines
  • Compact footprint, no special plumbing required - can mount on deck or bulkhead
  • Be sure to mount air-cooled compressors in a location that will not trap heat in a closed compartment or in an area will get hot (such as an engine room)
  • It is important that the compressor compartment is well ventilated allowing cool air to enter from below and hot air to escape at the top
  • Maximum freezer capacity of 1.5 cu. ft. and maximum refrigerator capacity of 4.4 cu. ft
  • Optional universal AC/DC kit is available for complete power supply compatibility (12/24 V, 230/115 V and 50/60 Hz)
  • The Isotherm warranty is 2 years from the date of purchase on all components and a 5 year limited warranty on the compressor

Specifications:

  • Evaporator: Large-L
  • Dimensions Evaporator H x W x D (inch): 15.7 + 6.9 x 8.25
  • Max. Box Volume Fridge (cu ft..): 4.4
  • Max. Box Volume Freezer (cu ft..): 1.5
  • Evaporator: Large-L
  • Dimensions Evaporator: 15.7" L x 6.9" W x 8.25" H
  • Danfoss / Secop Compressor type: BD35F
  • Power: 12 / 24V DC
  • Fan-Air Cooled
  • Max Draw: 2.5 Amp
  • Hourly Draw: .35 Amp (Based on system reaching Economy mode)

Data Sheet

Part Numbers for Isotherm 2010-SX Compact Air Cooled Refrigeration Component System with ISEC - U125X041L17151AA

Related Categories

Related Categories

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 7.95ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Questions

How long are the tubes that connect the evaporator to the comp/cond unit? (the standard tubes that are included - not the extension set)

Asked by: Fred
Not sure who RJT Outlet is but that is the WRONG answer. I was there yesterday and bought the item. While I was there I did not uncoil the tube to measure exactly but the included tubing is about 5 coils of about 6" diameter so that is about 8' in length. That would agree with a similar IsoTherm unit that was on display that I also measured (approximately). If you need just 7 or 8' of tubing between the evaporator coil and the comp/cond unit you do NOT need the extension tube set.
Answered by: Fred
Date published: 2024-01-03
  • y_2024, m_2, d_22, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_402821, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_defendermarine
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 4.28ms
  • QUESTIONS, PRODUCT