Icom VHF Marine Transceiver with Integrated AIS Receiver - M510 PLUS 21 USA

Icom's M510 Plus VHF Marine Transceiver is a tech-laden, two-in-one powerhouse with AIS receive capability for access to real-time vessel traffic information.

Features:

• Full color, 3.5" TFT LCD screen with near 180-degree viewing angles
• All-new sleek design is suitable for either panel or trunnion mounting
• Enhanced with animated functions and night mode for optional viewing in the dark
• Navigation function guides you to a specified waypoint or AIS target
• Assign up to 100 destinations as waypoints
• Integrated AIS receiver allows the IC-M510 to show real-time AIS vessel traffic information
• Directly make an individual DSC call to selected AIS targets from the AIS screen
• RS-M500 app allows you to connect three iOS® or Android™ smart devices to function as a wireless command speaker / microphone
• Push-to-talk features, scroll / scan channels, as well as an intercom function from the comfort of the captain's seat
• Waterproof speaker provides superior sound quality with a wide frequency range for powerful, clear audio
• Active noise canceling
• NMEA 0183/HS connectivity or connect to NMEA 2000 with the optional CT-M500 wireless interface box (sold separately)
• Integrated GNSS receiver (selectable from either internal receiver or use UX-241 GNSS antenna)
• IP68 Advanced waterproofing (1 m depth of water for 60 minutes)
• Automatic foghorn function (CT-M500 required)
• Voice Scrambler with optional UT-112A (sold separately)
• AquaQuake™ prevents audio degradation from a water-logged speaker
• Supplied speaker-microphone, HM-205RB can be connected to the rear panel
• Controlled with COMMANDMIC™ HM-195GB/GW
• Supports 4-digit channels

General

• Frequency range:
  • Tx: 156.025 - 157.425 MHz
  • Rx: 156.050 - 163.275 MHz
  • DSC: 156.525 MHz
  • AIS1, 2: 161.975, 162.025 MHz
• Usable channels: USA, INT, CAN, WX channels
• Type of emission: 16K0G3E (FM), 16K0G2B (DSC), 16K0GXW (AIS)
• Power supply requirement: 13.8V DC (11.715.9V DC)
• Current drain:
  • TX (25W output): 5.0A
  • RX (Max. audio): 3.3A
• Operating temperature range: -4°F to +140°F (-20°C to +60°C)
• Antenna impedance: 50Ω
• Weight (approx.): 1.6 lbs (730g) (not including microphone)
• Ingress protection standard: IP68

Transmitter

• Output power (at 13.8V DC): 25W, 1W
• Max. frequency deviation: ±5.0 kHz
• Frequency tolerance: ±0.5 kHz
• Spurious emissions: Less than -70 dBc (at 25W)
• Residual modulation: More than 40 dB
• Adjacent channel power: More than 70 dB

Receiver

• Sensitivity (at 12dB SINAD): 0.32 µV typical
• DSC (1% BER): 0.89µV emf typical
• Adjacent channel selectivity: More than 75 dB
• DSC (1% BER): More than 73 dBµ emf
• Spurious response: More than 75 dB
• DSC (1% BER): More than 73 dBµ emf
• Intermodulation: More than 75 dB
• DSC (1% BER): More than 68 dBµ emf
• Hum and noise: More than 40 dB
• Audio output power at 10% distortion: More than 15W with a 4Ω external speaker

Wireless LAN

• Wireless LAN standard: IEEE 802.11 b/g/n
• Authentication and encryption: WEP (64/128 bit), WPA-PSK (TKIP), WPA2-PSK (AES)
• Channels: 1 to 13 (2.4 GHz band)
• Output power: Less than 10 mW/MHz

May differ depending on the country of use

In the Box:

• M510 VHF marine transceiver
• Speaker microphone, HM-205RB
• Microphone hanger
• DC Power cable
• Mounting bracket kit

Icom M510 VHF Marine Transceiver Product Information (2.72 MB)

Icom M510 VHF Marine Transceiver Instruction Manual (20.37 MB)