Fusion Signature Series 24 V Marine 6-Channel Amplifier - 010-02556-00

The Fusion Signature Series, 24-volt, 6-channel Marine Amplifier, is designed for boats operating on 24-volt electrical systems. With a peak power of 1500-watts, the Signature Series Marine Amplifier provides increased efficiency and power output to your speakers and subwoofers, letting you enjoy your music for longer, without needing to worry about battery drain.

Features:

• Highly efficient, Class-D design that provides 1500W peak power
• Draws less current than a standard Class-AB amplifier
• Peak power of 1500W - easily power up to 6 pairs of speakers OR up to 4 pairs of speakers and 1 subwoofer
• Designed specifically for marine use with conformal coated PCBs that provide extra protection from the elements
• Engineered fin layout, calculated with precision to increase the surface area of the heat sink and improve heat dissipation
• Polished stainless steel control panel cover that conceals and helps protect all cable connections and the setting control panel, while providing an attractive finish
• Zone designations - input and output connections are labeled as zones
• Perfect for the marine environment and carries a 3-year warranty

Specifications:

• Frequency response: 10 Hz to 40 kHz (-3 dB @ 4 Ohm rated power)
• Peak power output: 1500 W
• Rated power output (4 Ohm): 100 W rms x 6 @ 28.8 V input < 1% THD + N (EIA/CEA-490A)
• Rated power output (2 Ohm): 140 W rms x 6 @ 28.8 V input < 1% THD + N (EIA/CEA-490A)
• Rated power output (4 Ohms bridged): 280 W rms x 3 @ 28.8 V input < 1% THD + N (EIA/CEA-490A)
• Input sensitivity: 0.3 V to 8 V rms, user adjustable
• Input impedance: 7k Ohm nominal
• High-Pass/Low-Pass Full Range Filter: Yes, user selectable
• Filter cross-over frequency: 32 Hz to 320 Hz, user adjustable
• Bass-Boost: 0 to 9 dB, user adjustable (zone 3 only)
• Operating voltage: 21.6 V to 32 V DC
• Remote switch-on: Yes, 6 V threshold
• Current consumption (standby): < 1 mA @ 28.8 V input
• Current consumption (idle): < 1.25 A @ 28.8 V input
• Current consumption (max): 35 A @ 28.8 V input
• Fuse rating: 3 x 20 A ATC Blade-Type (SAE J1171 Compliant)
• Protection circuits: Reverse-Voltage, Input Under/Over Voltage, Over-Temperature, Output Short-Circuit
• Operating temperature range: 0 to 50° C (32 to 122° F)
• Ingress protection rating: Dry area installation only
• Dimensions: 16-9/16" (L) x 8-1/4" (W) x 2-1/4" (H)
• Weight: 11.35 lbs with cover