Fusion Signature Series 12 V Marine 8-Channel Amplifier - 010-02162-00

The Signature Series, 12-volt, 8-channel Marine Amplifier is Fusion's most efficient, stunning and powerful marine amplifier. With a peak power of 2000-watts, the Signature Series Marine Amplifier provides increased efficiency and power output to your speakers and subwoofers, letting you enjoy your music for longer, without needing to worry about battery drain.

Features:

• Fusion's first 8 Channel, Class-D Hi-Fi Marine Amplifier
• 2000W peak power - draws less current than a standard Class-AB amplifier
• Peak power of 2000W - easily power up to 8 pairs of speakers OR up to 4 pairs of speakers and 2 subwoofers
• Designed specifically for marine use with conformal coated PCBs that provide extra protection from the elements
• Engineered fin layout, calculated with precision to increase the surface area of the heat sink and improve heat dissipation
• Polished stainless steel control panel cover that conceals and helps protect all cable connections and the setting control panel, while providing an attractive finish
• Zone designations - input and output connections are labeled as zones

Specifications:

• Frequency response: 10 Hz to 40 kHz (-3 dB @ 4 Ohm rated power)
• Peak power output: 2000 W
• Rated power output (4 Ohm): 100 W rms x 8 @ 14.4 V input < 1% THD+N (EIA/CEA-490A)
• Rated power output (2 Ohm): 140 W rms x 8 @ 14.4 V input < 1% THD+N (EIA/CEA-490A)
• Rated power output (4 Ohm bridged): 280 W rms x 4 @ 14.4 V input < 1% THD+N (EIA/CEA-490A)
• Input sensitivity: 0.3 V to 8 V rms, user adjustable
• Input impedance: 7k Ohm nominal
• High-Pass/Low-Pass full range filter: Yes, user selectable
• Filter cross-over frequency: 32 Hz to 320 Hz, user adjustable
• Filter cross-over slope: 12 dB/octave
• Bass-boost: 0 to 9 dB, user adjustable (zone 2/4 only)
• Operating voltage: 10.8 V to 16 V DC
• Remote switch-on: Yes, 6 V threshold
• Current consumption (standby): < 1 mA @ 14.4 V input
• Current consumption (idle): < 2.5 A @ 14.4 V input
• Current consumption (max): 100 A @ 14.4 V input
• Fuse rating: 4 x 40 A ATC Blade-Type (SAE J1171 Compliant)
• Protection circuits: Reverse-Voltage, Input Under/Over Voltage, Over-Temperature, Output Short-Circuit
• Operating temperature range: 0 to 50° F (32 to 122° F)
• Ingress protection rating: Dry area installation only
• Dimensions: 16-9/16" (L) x 8-1/4" (W) x 2-1/4" (H)
• Weight: 11.5 lbs with cover