Blue Sea BatteryLink Battery Charger

The Blue Sea BatteryLink® Charger Charges (2) Batteries at or away from the dock with a 10 Amp multi-stage battery charger and an integrated 65 Amp Automatic Charging Relay (ACR).

Features:

• AC Charging at the Dock: Use AC shore power to charge (2) isolated battery banks with the 3-Stage, 10 Amp battery charger
• DC Charging Away from the Dock: Share the DC power from the alternator with both the Start and the Auxiliary batteries through the integrated 65 Amp ACR
• Battery temperature compensation prolongs battery life
• Start isolation protects sensitive electronics from voltage sags and spikes
• Includes LED remote indicator for charge status at the helm
• Snap-on insulating cover
• One-piece stainless flange nuts ensure safe and secure connections

Specifications:

• Nominal Voltage: 12 Volt DC
• Number of Outputs: 1 Negative/2 Positive
• Terminal Stud Torque: 60 in-lb (6.78 Nm)
• Universal AC Input Voltage: 90-265 Volt AC
• AC Input Frequency: 50/60Hz
• Typical Float Voltage: 13.5 Volt DC
• Battery Types: AGM Flooded TPPL
• Cable Size to Meet Ratings:
  • 10 AWG Negative Cable
  • 6 AWG Positive cable
• Maximum Battery CCA: 850 CCA
• Maximum Cable Size: 1/0 AWG (50 mm)
• Plug Style North American: NEMA 5-15P
• Recommended Battery Bank Sizes 60Ah Minimum
  • Battery bank sizes are tested to California Energy Commission compliance
  • Larger and smaller size banks could charge well, but consume slightly more power over the charging cycle
• Terminal Stud Size: 1/4"-20
• Combine 30 sec: 13.5 Volt
• Combine 2 Min: 13.0 Volt
• Open 10 sec: 12.35 Volt
• Open 30 sec: 12.75 Volt
• Weight: 6.75lb (3.06 kg)

Click Here for a Dimensional Drawing of this Product