Item #859796

Airmar 220WXH Apparent & True Wind WeatherStation with Heater - WS-220WX-HTR

00 Review
$1,726.99
Want an email once available?
Buy with

Image of : Airmar 220WXH Apparent & True Wind WeatherStation with Heater - WS-220WX-HTR Airmar 220WXH Apparent & True Wind WeatherStation with Heater - WS-220WX-HTR Item # 859796

Description

The Airmar WeatherStation WS-220WXH includes a 60 Watt heater. The heater may be used to prevent the formation of dew or ice on the aluminum plate in the wind channel.

Airmar 220WXH Features

  • If the Heater Mode is set to Automatic, then the WeatherStation will automatically cycle the heater on and off over time to keep the plate temperature within appropriate limits based on the air temperature and dew point temperature
  • Note that when the heater is on, the air temperature sensor within the unit will be heated by the heater and will not provide an accurate indication of outside ambient air temperature
    • If an accurate air temperature is desired, you should consider using a separate temperature sensor (Sold Separately) in conjunction with the WeatherStation
  • This model with heater must be used with one of the special heater-compatible NMEA 0183 cables (Sold Separately)
    • It cannot be used with a regular NMEA 2000 cable

General Features:

  • The Airmar WS-220WXH WeatherStation reads apparent wind and true wind, barometric pressure, air temperature, wind chill temperature, dew point temperature and heat index temperature
  • Airmar WS-220WX WeatherStation outputs both NMEA 2000 and NMEA 0183 data and can be used with any of the Airmar WeatherStation cables
  • True wind speed and direction
  • Includes 10Hz GPS (COG/SOG/Position) Three-axis solid state compass with dynamic stabilization
    • Better than 1 degree static compass accuracy
    • Best-in-class 2 degree dynamic compass accuracy
    • Three-axis rate gyros provide rate-of-turn data Best-in-class pitch and roll accuracy
    • Three-axis accelerometer for pitch and roll Barometric pressure
  • Air temperature
  • Wind chill temperature
  • Measures wind speed and direction ultrasonically
  • Outputs both NMEA 0183 and NMEA 2000
  • Access to WeatherCaster Software included
  • Very easy installation
  • Maintenance-free operation
  • Mounts on standard 1"-14 base
  • NMEA 2000
  • 220WX 3-axis compass with yaw rate gyro, which can maintain 2° of heading accuracy in dynamic (heeling) conditions
    • These compass readings are very accurate which result in accurate true wind readings when a sailboat is heeled
  • Optional humidity sensor that is field serviceable (Sold Separately)
  • IPX6 waterproof rating (units with the relative humidity module are IPX4 waterproof rated)
  • Power supply featuring a 50% reduction in current draw for use in remote locations that use solar or battery power
  • Wider operating voltage range of 9-40 VDC
  • Adjustable, unfiltered wind data for monitoring maximum gust conditions
  • Output via a single cable (various lengths available) for power either RS422 (NMEA 0183) or CAN BUS (NMEA 2000) data interface (optional RS232 NMEA 0183)
  • WeatherCaster PC software for viewing and customizing data sentences
  • Low-cost, easy to install units either permanently or as a portable system
    • Units can be installed on a standard pole with 1"-14 UNS or 3/4" NPT threads

Includes:

  • Airmar WS- 220WXH Apparent & True Wind WeatherStation with Heater
  • Access to WeatherCaster software
  • Standard 1-14" UNS marine thread
  • Manual

Note: All Cables Sold Separately

Data Sheet

Owner's Manual

Part Numbers for Airmar 220WXH Apparent & True Wind WeatherStation with Heater - WS-220WX-HTR

Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 29.58ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Questions

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 43.5ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;